Points to note when using a saw chain：
1. Wear personal protective equipment to prevent the saw chain from rebounding during use.
1. Wear personal protective equipment to prevent the saw chain from rebounding during use.
2. When cutting, stand on one side of the saw and hold the saw with both hands.
3. When the saw is running, do not run around with the saw
4. Keep the saw properly maintained.
5. When replacing a new chain or using it in a cold area, it is recommended to run at low speed for two minutes so that the chain can be pumped with moderate lubricating oil.
6. Try to avoid collision with rocks, stones, concrete or hardened metal.
Points to note when maintaining a saw chain：
1. When maintaining and replacing the chain, make sure that the chain saw is not running and wear professional gloves.
2. To properly lubricate the chain, use only high-quality lubricants.
3. After the new chain has been cut several times, it should be checked again, and the tension should be readjusted after cooling if necessary.
4. Please wear gloves to adjust the chain tension to avoid injury.
5. Always file in the direction of the indicator line on the top plate.
